As a supplier of Rear Dump Tipper Trailers, I understand the importance of proper storage during the off - season. Not only does it extend the lifespan of the trailer, but it also ensures that it's in top - notch condition when the next working season rolls around. In this blog, I'll share some professional tips on how to store your Rear Dump Tipper Trailer effectively.
1. Choose the Right Storage Location
The first step in storing your Rear Dump Tipper Trailer is selecting an appropriate storage site. An ideal location should be dry, well - ventilated, and protected from the elements. If possible, choose an indoor storage facility such as a warehouse. Indoor storage shields the trailer from rain, snow, and direct sunlight, all of which can cause corrosion and damage to the trailer's body and components over time.
However, if indoor storage is not an option, an outdoor storage area that is elevated and well - drained can work. Make sure the area is away from standing water, as water can seep into the trailer's undercarriage and cause rust. Also, consider using a weatherproof cover to protect the trailer from the sun and rain.
2. Clean the Trailer Thoroughly
Before storing the trailer, a comprehensive cleaning is essential. Start by removing all the remaining cargo from the dump body. Any leftover material can attract moisture and lead to corrosion. Use a high - pressure water hose to clean the exterior of the trailer, including the dump body, chassis, and wheels. Pay special attention to areas where dirt and debris tend to accumulate, such as the corners of the dump body and the axles.
For stubborn stains and grease, use a suitable degreaser and a stiff brush. After cleaning the exterior, clean the interior of the dump body. You can use a mild detergent and water to scrub the inside, then rinse it thoroughly. Once the trailer is clean, dry it completely to prevent water spots and rust.
3. Perform Maintenance Checks
Proper maintenance checks before storage can save you a lot of headaches when the off - season ends. First, check the tires. Inflate them to the recommended pressure. Under - inflated tires can develop flat spots during long - term storage, which can affect the trailer's performance and safety when it's back on the road. You can also place the trailer on blocks to relieve the pressure on the tires, further preventing flat spots.
Inspect the brakes, suspension, and hydraulic systems. Look for any signs of leaks, damage, or wear. If you find any issues, address them immediately. Lubricate all moving parts, such as hinges, pivot points, and the hydraulic cylinders. This helps prevent rust and ensures smooth operation when the trailer is put back into use.
Check the electrical system as well. Make sure all the lights are working properly and that there are no loose connections. If possible, disconnect the battery to prevent it from discharging during storage. You can also charge the battery periodically to keep it in good condition.
4. Protect the Trailer's Finish
The trailer's finish not only gives it an aesthetic appeal but also protects the underlying metal from corrosion. To protect the finish during storage, consider applying a wax or a protective coating. This creates a barrier between the metal and the elements, preventing rust and oxidation.
For the dump body, you can use a specialized liner to protect it from abrasion and corrosion. Liners are available in different materials, such as rubber or polyethylene, and can significantly extend the lifespan of the dump body.
5. Secure the Trailer
Once the trailer is clean, maintained, and protected, it's time to secure it properly. Make sure the trailer is parked on a level surface and that the parking brake is engaged. Use wheel chocks to prevent the trailer from rolling.
If you're storing the trailer outdoors, consider using a security system. This can include a lock on the trailer hitch and a visible deterrent, such as a security sticker. This helps prevent theft and vandalism during the off - season.
Why Proper Storage Matters
Proper storage of your Rear Dump Tipper Trailer during the off - season is not just about convenience; it's about protecting your investment. A well - stored trailer will have a longer lifespan, require fewer repairs, and perform better when it's back in use. It also ensures the safety of the operators and other road users, as a trailer in good condition is less likely to experience mechanical failures.
As a Rear Dump Tipper Trailer supplier, I've seen firsthand the difference that proper storage can make. Trailers that are stored correctly come back to the road in excellent condition, ready to take on the next job.
Explore Our Trailer Options
If you're in the market for a new Rear Dump Tipper Trailer, we have a wide range of options available. Check out our New Tipper Semi - Trailers For Sale and End Dump Trailers For Sale pages. Our 3 Axle 40 Cubic Rear End Dump Semi Trailer is a popular choice among our customers, offering high capacity and reliable performance.
Whether you're a small - scale contractor or a large - scale hauling company, we have the right trailer for your needs. Contact us today to discuss your requirements and start a procurement negotiation. We're here to provide you with the best trailers and the most professional service.
References
- Trailer Maintenance and Storage Guides from Industry Associations
- Manufacturer's Manuals for Rear Dump Tipper Trailers
- Personal Experience as a Rear Dump Tipper Trailer Supplier