Hey there! As a supplier of lowbed semi - trailers, I know how crucial it is to keep the hydraulic system of these trailers in top - notch condition. A well - functioning hydraulic system ensures smooth operation, safety, and longevity of your lowbed semi - trailer. In this blog, I'm gonna walk you through how to check the hydraulic system of a lowbed semi - trailer.
1. Visual Inspection
The first step in checking the hydraulic system is a simple yet effective visual inspection. You don't need any fancy tools for this; just your eyes and a bit of common sense.
Check the Hoses
Start by looking at the hydraulic hoses. These hoses carry the hydraulic fluid from the pump to the various components of the system. Look for any signs of wear, such as cracks, cuts, or bulges. A cracked or bulging hose can lead to fluid leaks, which not only reduces the efficiency of the system but can also be a safety hazard. If you spot any damaged hoses, it's best to replace them right away. You can find high - quality replacement hoses for our 3 - Axle 40ft Gooseneck Hydraulic Ladder Semi - Trailer and other models in our inventory.
Inspect the Fittings
Next, check the fittings that connect the hoses to the different components of the hydraulic system. Make sure they are tight and free from any signs of leakage. Loose fittings can cause fluid to seep out, leading to a loss of pressure in the system. If you notice any fittings that are loose, use a wrench to tighten them carefully.
Look for Leaks
While you're doing the visual inspection, keep an eye out for any signs of hydraulic fluid leaks. Leaks can occur at the hoses, fittings, or even at the hydraulic cylinders. A tell - tale sign of a leak is the presence of a puddle of hydraulic fluid under the trailer or a wet spot on the hoses or components. If you find a leak, it's important to identify the source and fix it as soon as possible.
2. Check the Hydraulic Fluid
The hydraulic fluid is the lifeblood of the hydraulic system. It transfers power from the pump to the various components and also lubricates the moving parts.
Fluid Level
Check the fluid level in the hydraulic reservoir. Most lowbed semi - trailers have a sight glass or a dipstick that allows you to easily check the fluid level. The fluid level should be between the minimum and maximum marks indicated on the sight glass or dipstick. If the fluid level is low, it could indicate a leak in the system or excessive consumption. Add the recommended type of hydraulic fluid to bring the level up to the proper range.
Fluid Condition
In addition to checking the fluid level, you also need to assess the condition of the hydraulic fluid. The fluid should be clean and free from any contaminants, such as dirt, debris, or water. If the fluid looks cloudy, has a strange odor, or contains particles, it's a sign that the fluid needs to be changed. Contaminated fluid can cause damage to the hydraulic components and reduce the efficiency of the system. You can refer to the owner's manual of our 50 - 60 Ton 3 Axle Low Flat Bed Semi Trailer for the recommended fluid change intervals.
3. Test the Hydraulic Pump
The hydraulic pump is responsible for generating the pressure needed to operate the hydraulic system. To check the pump, you can perform a simple pressure test.
Start the Engine
First, start the engine of the tractor that is pulling the lowbed semi - trailer. Let the engine run for a few minutes to allow the hydraulic system to warm up.
Operate the Hydraulic Controls
Next, operate the hydraulic controls to activate the various functions of the trailer, such as raising or lowering the bed. Pay attention to how the system responds. If there is a delay in the operation or if the system seems sluggish, it could indicate a problem with the pump.
Check the Pressure Gauge
Many lowbed semi - trailers are equipped with a pressure gauge that allows you to monitor the pressure in the hydraulic system. Check the pressure gauge while operating the hydraulic controls. The pressure should be within the recommended range specified in the owner's manual. If the pressure is too low or too high, it could mean that the pump is not functioning properly.
4. Inspect the Hydraulic Cylinders
The hydraulic cylinders are the components that convert the hydraulic pressure into mechanical force. They are responsible for lifting and lowering the bed of the lowbed semi - trailer.
Check for Movement
Extend and retract the hydraulic cylinders several times to check for smooth movement. The cylinders should move freely without any jerks or sticking. If you notice any problems with the movement, it could be due to a damaged seal or a bent rod.
Look for Leaks
As with the hoses and fittings, check the hydraulic cylinders for any signs of leakage. Leaks can occur at the seals or the connections of the cylinders. If you find a leak, it's important to replace the damaged seal or repair the connection.
5. Check the Filters
Filters play a crucial role in keeping the hydraulic fluid clean. They remove contaminants from the fluid, preventing them from damaging the hydraulic components.


Replace the Filters Regularly
Most lowbed semi - trailers have a hydraulic filter that needs to be replaced at regular intervals. Refer to the owner's manual for the recommended replacement schedule. A clogged or dirty filter can restrict the flow of hydraulic fluid, reducing the efficiency of the system.
Inspect the Filter Housing
While replacing the filter, also inspect the filter housing for any signs of damage or leaks. Make sure the housing is properly sealed to prevent contaminants from entering the system.
6. Test the Safety Valves
Safety valves are an important part of the hydraulic system. They are designed to prevent the system from over - pressurizing, which can cause damage to the components or even lead to an accident.
Check the Relief Pressure
Test the relief pressure of the safety valves to ensure that they are functioning properly. The relief pressure should be set at the recommended level specified in the owner's manual. If the relief pressure is too high or too low, it could indicate a problem with the safety valve.
Look for Leaks
Inspect the safety valves for any signs of leakage. Leaks can occur at the valve seat or the connections. If you find a leak, it's important to repair or replace the safety valve.
Why Regular Checks Matter
Regularly checking the hydraulic system of your lowbed semi - trailer is not just about preventing breakdowns. It also helps to extend the lifespan of the trailer, improve its performance, and ensure the safety of the operators and other road users. A well - maintained hydraulic system can save you a lot of money in the long run by reducing the need for costly repairs and replacements.
If you're in the market for a new lowbed semi - trailer or need any parts and accessories for your existing one, we've got you covered. Our Extendable Low Bed Trailer and other models are built to the highest standards of quality and reliability.
If you have any questions about checking the hydraulic system of your lowbed semi - trailer or are interested in purchasing one of our trailers, feel free to reach out. We're here to help you make the right choice and keep your trailer in great shape.
References
- Lowbed Semi - Trailer Owner's Manuals
- Hydraulic System Maintenance Guides
